Browse all practice questions for the BNSF Maintenance of Way Operating Rules Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

BNSF Maintenance of Way Operating Rules Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • How will Maintenance of Way employees determine the location of a train after receiving authority to occupy the track?
  • What is the function of yard limits (YL) in railway operations?
  • What should an employee do if they do not understand a signal?
  • What must be done when machines are to be tied up?
  • What happens once the "OK" time is received for foul time?
  • What do the numbers on permanent speed restriction signs indicate?
  • Under what condition can speed restrictions be issued without dispatcher approval?
  • Who is responsible for the position of a switch or derail that is in use?
  • What must lone workers do when using individual train detection before fouling the track?
  • When must maintenance of way employees test their radios?
  • What happens if an employee cannot clear OCS limits before time expires?
  • When does a track warrant go into effect for the employee requesting it?
  • Which engine's number will be illuminated when multiple engines are coupled?
  • Who must an employee call when requesting track and time?
  • What is the primary purpose of track warrant control?
  • What is the primary responsibility of the dispatcher when it comes to track time requests?
  • What does the abbreviation RL indicate in the context of track operations?
  • What does the control point enable in terms of train operations?
  • What does a full railroad flagging kit consist of?
  • Can employees use additional hand signals beyond the prescribed signals?
  • What is the minimum equipment that each flagman must carry?
  • What does a track warrant authorize within designated limits?
  • In which situation must a flagman thoroughly explain the reason for stopping a train?
  • Who is responsible for maintaining a safe braking distance between on-track equipment?
  • According to the rules, what is essential to establish protection for track conditions?
  • Under what conditions may OCS be in effect at designated locations?
  • What should be done when a track condition requires protection?
  • Under track warrant control, what is necessary for a train to occupy a main track?
  • Where must red flags or lights be displayed?
  • What does the term MT refer to in railroad track operations?
  • How does communication impact procedures under OCS?
  • How are yellow-red flags displayed when the restricted area is close to a terminal?
  • How far in advance must flagmen station themselves to protect on-track equipment or conditions?
  • Who is responsible for providing speed restrictions to trains?
  • What action should be taken if a main track is fouled without authority?
  • Before entering a main track at an electrically locked switch, what is required?
  • According to rule 1.10, what must employees on duty refrain from doing?
  • How will all movements be made within the form B limits when authority limits overlap?
  • In track operations, what does the abbreviation NBCS mean?
  • What action must crew members take when moving at restricted speed?
  • Which abbreviation indicates a westbound controlled signal?
  • What can be used to restrict or stop train movement due to track conditions?
  • What is the purpose of Centralized Traffic Control (CTC)?
  • What must an employee do before operating a dual control switch by hand?
  • How will spring switches be identified?
  • How long before a new timetable takes effect is notification given?
  • What type of documentation must be adhered to when managing train movements near track conditions?
  • How are OCS limits designated according to the guidelines?
  • How are flags displayed to protect speed restrictions or men and equipment in a current of traffic?
  • What is the expectation for stopping when encountering railroad cars or equipment fouling the track?
  • Before entering OCS limits, which entity must always be consulted?
  • Under what circumstances may foul time be issued as "joint"?
  • What is the significance of multiple main tracks?
  • What does EBCS stand for in train signal terminology?
  • What condition applies if the yellow-red flag is used less than two miles from a restricted area?
  • What does the term 'current of traffic' refer to?
  • Track and time authority limits designated by a switch extend only to where?
  • Before operating equipment in tracks near an interlocking, what is necessary?
  • What best describes double track in railroad terminology?
  • What action must an employee take before transmitting on a radio?
  • When cars are shoved on the main track or controlled siding, what is the maximum speed allowed for freight trains?
  • When may yellow-red flags be displayed less than two miles in advance of a restricted area?
  • How should flags be removed according to operating rules?
  • On-track equipment must remain at least how far behind a moving or stationary train?
  • How should flags be displayed in multiple main track territory?
  • Which of the following best describes the relationship between OCS and yard limits?
  • Under what condition may hy-rail vehicles move through the spring side of a spring frog?
  • What does SXO represent in railway operations?
  • When a condition exists that requires the restriction of a train, how should this be communicated?
  • What is the definition of 'absolute signals' in train operations?
  • How should trains or engines behave in the presence of a stop signal at restricted speed?
  • Where will a track permit authorize a train or employee to occupy a main track?
  • What happens when a train reports passing a station to the dispatcher?
  • What is a key requirement when operating under OCS conditions?
  • To indicate a communication is complete and no response is expected, what should a transmitting employee say?
  • What must be included in the on-track safety statement for lone workers?
  • What is the maximum speed allowed for trains or engines moving at restricted speed?
  • When must crew members be prepared to stop regarding yellow-red flags?
  • For an employee to operate under OCS, they must remain within what specific contextual guidelines?
  • Which term describes a track connected to the main track for meeting or passing trains?
  • In railway signaling, what does WBCS signify?
  • In an emergency situation, which is proper protocol regarding personal safety?
  • Why is a green flag never used to release a train from yellow-red flag requirements?
  • What is required from the employee in charge during a job safety briefing with multiple work groups?
  • In railroad context, what is the significance of a controlled signal?
  • What must employees do to recognize and follow signals correctly?
  • How must inspections of passing trains be performed?
  • When is it not necessary for an employee to repeat a transmission?
  • What does EXO indicate in the railroad system?
  • What is an important condition regarding employee behavior on duty?
  • What does the abbreviation for North Siding Switch mean in railroad terms?
  • What must be established when employees are unable to obtain authority and need to foul or occupy a main track?
  • What should be used to advise a train dispatcher of a restriction?
  • When may maintenance of way (MW) employees establish working limits using train coordination?
  • What must a lone worker do prior to fouling the track?
  • On double track, how must trains move unless otherwise instructed?
  • When a passenger train is discharging or receiving traffic, what must on-track equipment do?
  • What is the required identification for a mobile unit during radio communication?
  • What is the primary responsibility of the operator of on-track equipment?
  • How must on-track equipment approach bridges during unusually heavy rain or storms?
  • What is a siding used for in railway operations?
  • How is protection established when a track condition requires it, but no bulletin or warrant has been issued?
  • In the event of an emergency, how should track safety be ensured?
  • How should maintenance work on a siding be conducted?
  • How far in advance must employees display a yellow-red flag before a restricted area to ensure preparedness?
  • What must employees or on-track equipment do before occupying main track where OCS is in effect?
  • How will restricted limits be designated?
  • When must on-track equipment obtain dispatcher authority in relation to OCS?
  • What should an employee do if they receive an unclear or incomplete communication that may affect safety?
  • Which factor is essential for determining the effectiveness of OCS limits?
  • When can flagging against the current of traffic in double track be discontinued?
  • When transmitting numbers, what must be done with single digit numbers?
  • What is the minimum distance cars, engines, or equipment should be left from a road crossing when adjacent tracks are present?
  • What is the minimum separation distance on-track equipment may be bunched to travel over crossings, control points or structures?
  • What must an employee do after using the hand brakes?
  • What type of conditions must be protected when restrictions are not specified in writing?
  • What type of documentation is required when authority limits overlap between two employees?
  • When should red flags or lights be placed in advance of an obstruction?
  • When may a train only ignore a red signal?
  • When must employees refresh information on overlapping form Bs?
  • What should be done when a restricted area is too close to a terminal to display a yellow flag two miles in advance?
  • What is the consequence of authority expiration under OCS if a dispatcher cannot be contacted?
  • When requesting authority, what must the employee in charge ensure?
  • How do crew members proceed if a yellow-red flag is displayed without specified restrictions?
  • What is the primary role of the train dispatcher in the context of OCS?
  • When is foul time considered to be in effect?
  • How must a lookout warn employees of an approaching train?
  • How many speeds may MW employees authorize through the limits of a form B?
  • What must a transmitting employee say to indicate communication is complete and a response is expected?
  • What action is required if the rear of the train does not clear the restricted area?
  • What should be done if signal appliances are found to be in poor condition?
  • How are multiple tracks designated when viewing them in a northward or eastward timetable direction?
  • Where must the name of the employee in charge of each work group using the authority be recorded?
  • What must an employee do to request foul time?
  • What is the maximum speed permitted for hy-rail vehicles with a gross vehicle weight of 15,000 lbs or under?
  • What defines adjacent tracks in railway terminology?
  • What is a fundamental requirement regarding track permits?
  • At what speed must all movements be made in restricted limits?
  • How should track personnel ensure safety when they are not certain of track conditions?
  • What type of alphabet should be used to pronounce clearly any letter used as an initial during transmissions?
  • What constitutes an acceptable communication method for employees giving protection?
  • What is the correct action if an employee receives a joint authority that overlaps with another's?
  • What does the term 'Main Track' generally imply in railway operations?
  • What are the requirements when a switch is used for protection on tracks other than the main track?
  • How should equipment be protected when working on bowl tracks?
  • Which acronym denotes a crossover located at the eastern part of the track?
  • What is required for employees providing protection for a work group or lone worker?
  • What must a train do if it encounters a flag that restricts its movement?
  • What is the purpose of a Restricted Limit sign in track operations?
  • When may on-track equipment make trailing point movements through variable switches?
  • Where and when should employees expect the movement of trains, engines, or cars?
  • How will employees be notified of a new timetable going into effect?
  • Once the train is two miles beyond a yellow-red flag with no red flag encountered, what should the crew do?
  • In what situation is it crucial for an employee to understand OCS operational protocols?
  • What does the timetable specify regarding multiple main tracks?
  • Which flag should be removed first when multiple flags are displayed?
  • What should be done prior to conducting inspections on passing trains?
  • What must the employee do before occupying the limits of a manual interlocking?
  • Who should be notified first about a required temporary track restriction?
  • When a track warrant designates a station with a siding, where does the authority extend to?
  • What must be done to occupy an automatic interlocking equipped with a MW release box?
  • Which of the following designations signifies a mile marker on the railroad?
  • How will track warrant limits be designated?
  • What does DT signify in railroad operations?
  • What is a primary reason for defining OCS limits with exact points?
  • What is the requirement for appliances used to give and display signals?
  • How should the term "current of traffic" be interpreted in railroad safety protocols?
  • When hand brakes must be used to control or prevent car movement, what must be done?
  • What does a green flag signify to train crews?
  • In what situation can maintenance work on a siding commence without prior approval?
  • What is represented by the acronym ESS in railroad terminology?
  • What does the abbreviation SSS stand for in railroad terminology?
  • Under what condition may trains pass a red flag or light without stopping?
  • How are yard limits denoted in railway operations?
  • What must employees be aware of when using radio communication instead of hand signals?
  • What is a key responsibility of an employee at a control point?
  • What signals indicate that a switch is aligned for movement?
  • When there is an emergency, what must employees do?
  • When is it permissible to display a green flag?
  • What should an employee do when their duties affect yard movement and no yardmaster is on duty?
  • What is a control point in railroad operations?
  • What kind of point is referred to for track warrant limits?
  • What defines a main track in railway operations?
  • Who should be contacted at the first available means when a condition exists?
  • What must not be exceeded according to track warrant, track bulletin, or radio speed restriction?
  • What does NSS stand for in railroad terminology?
  • What color flags or lights should be used for day signals?
  • What must be specified when a foul time request is made?
  • How will MW equipment proceed at an automatic interlocking not equipped with a MW release box if the equipment does not shunt the track?
  • When should malfunctioning radios be used?
  • What type of track does a track warrant NOT authorize a train to occupy?
  • Emergency calls on the radio should start with which phrase?
  • How far ahead must yellow flags be placed before a restriction?
  • Who must maintenance forces contact before beginning repairs, disconnecting equipment, or obstructing the track?
  • What action should be taken if a machine's brakes are found to be malfunctioning?
  • What material should flags used for day signals be made from?
  • During humping operations, before an employee performs maintenance on a bowl track, what must be done?
  • When must crew members continue moving a train at a speed not exceeding 10 mph?
  • What is the requirement for a flagman after stopping a train?
  • What must an employee requesting track and time provide?
  • What must be done with speed restriction signs prior to a permanent speed restriction?
  • What type of flags or lights are permissible for temporary track conditions?
  • Who is responsible for ensuring that equipment does not occupy a track until authority is received?
  • What is the validity of movement authority during the "void" period?
  • When granted joint track and time, what must be done if the track is not safe for trains to move at a speed of at least 20 mph?
  • If a person signaling to back or shove disappears, what is the required action?
  • In railroad terms, what is represented by the acronym SBCS?
  • Which of the following best describes an effective locking device in relation to a switch or derail?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy